Mining in Manitoba |
Detonating Cord |
Mining Systems |
||
|
Detonating cord (detonating fuse) resembles safety fuse but contains a high explosive instead of black powder. The first successful one, patented in France in 1908, consisted of a lead tube, about the same diameter as safety fuse, filled with a core of TNT. It was made by filling a large tube with molten TNT that was allowed to solidify. The tube was then passed through successively smaller rolls until it reached the specified diameter. In France the product was called cordeau détonant, elsewhere shortened to cordeau. Its velocity was about 4,900 metres (16,000 feet) per second. In 1936 the Ensign-Bickford Company, Simsbury, Connecticut, the American manufacturers of cordeau, developed Primacord, based on French patents and constituting a core of PETN covered with various combinations of textiles, waterproofing materials, and plastics. The velocity is approximately 6,400 metres (21,000 feet) per second. Many types of Primacord are available for both military and commercial use, but the industrial varieties generally contain from 25 to 60 grains of PETN per 0.3 metre. RDX is sometimes used in place of PETN for high temperatures, because the melting points are, respectively, 203.5º and 140º C (398.3º and 284º F). Detonating cord has many applications in blasting. Any number of holes can be connected with it in just about any desired pattern. Attached to the blasting charge and knotted to a trunk line, it is fired by means of either a fuse-type or electric blasting cap. Sequential shooting may be obtained by cutting the trunk lines and inserting delay connectors, which have delay periods ranging from about 5 to 25 milliseconds
|
Black Powder
Liquid Oxygen
|